Loading... Please wait...

Wood Kote Jel'd Poly Kote 250

  • Image 1
1.00 LBS
Calculated at checkout

Product Description

Jel’d Poly Kote 250 is intended for professional use only. It is formulated for interior wood surfaces especially those surfaces that are not subject to heavy wear or that would be difficult to coat with conventional products. Examples are ceilings, bookshelves, banisters and paneling. It has low build and low odor. Jel’d Poly Kote 250 may be applied to bare, bleached or stained wood. It is compatible with a variety of other Wood Kote products. Please refer to the Wood Kote Schedule of Product Compatibility and Recommended Dry Times. Jel’d Poly Kote 250 complies with the US Environmental Protection Agency (EPA) Volatile Organic Compound (VOC) emission requirements for Architectural and Industrial Maintenance coatings (effective 13Sep99). Jel’d Poly Kote 250 complies with California SCAQMD Rule 1113 (effective 30Jun06).


  • Easy to apply
  • Fast Drying
  • Will not run or drip
  • No application tools to clean


One application of Jel’d Poly Kote 250 will cover approximately 1200- 1500 sq ft/gal (29,4-36,8 m2/L). For best results, 6-12 coats are recommended.

Composition & Properties

Jel’d Poly Kote 250 is a gelatinous wipe-on polyurethane formulated with polyurethane and alkyd resins. It is intended for application without thinning. If thinning is desired, PolySolvent (mineral spirits) should be used or, if regulations require a VOC-exempt thinner, use AceThin (acetone) or OxyThin (p-Chloro-a,a,a Trifluorotoluene).

Find Similar Products by Category

Write your own product review

Product Reviews

  1. Works great. 5 Star Review

    Posted by on 9th Sep 2015

    As advertised: easy to use, looks good, protects the wood.

  2. Better than expected 4 Star Review

    Posted by on 26th Aug 2014

    I have used Jel'd poly Kote Satin for years with great success. Last time I went to re-order, I was disappointed to find that it was only available in matte finish so I purchased a competitor's product which isn't quite as good as I had experienced with Wood Kote. So recently I thought I'd give the matte finish Jel'd PolyKote a try. I have found that the finish sheen is more toward satin than matte so I think I'll continue to use it.
    Downside is that it dries really really fast so you don't have much time to get te steaks out when wiping it on. I haven't used it on any large surfaces yet so it will be interesting to see how it behaves when I do a large panel.

Add to Wish List

Click the button below to add the Wood Kote Jel'd Poly Kote 250 to your wish list.

You Recently Viewed...