Loading... Please wait...

Wood Kote Jel'd Stain H2O

  • Image 1
2.00 LBS
Calculated at checkout

Product Description

Basic Use-

Jel’d Stain H2O is formulated for interior wood surfaces such as casework, doors, trim, paneling and cabinets. Although some colors are very similar, Jel’d Stain H2O colors are not intended to match the corresponding colors of solvent-based Original Jel’d Stain, Jel’d Stain 550 & 250 or Liqwid Stain 550 & 250. Jel’d Stain H2O may be applied to bare or bleached wood. It is compatible with a variety of other Wood Kote products. Please refer to the Wood Kote Schedule of Product Compatibility and Recommended Dry Times. Jel’d Stain H2O complies with the US Environmental Protection Agency (EPA) Volatile Organic Compound (VOC) emission requirements for Architectural and Industrial Maintenance coatings (effective 13Sep99) and with California SCAQMD Rule 1113 (effective 13Jul07).


  • Easy to apply
  • 2-3 times more coverage than liquid stains
  • Low odor and low VOC
  • No stirring required
  • Soap and water clean up


One application of Jel’d Stain H2O will cover approximately 1250-1500 sq ft/gal (30,6-36,8 m2/L). Recoating is possible.

Composition & Properties-

Jel’d Stain H2O is a water-based semi-transparent pigment wood stain. It is intended for application without thinning. If thinning is desired, tap water should be used.

Find Similar Products by Category

Write your own product review

Product Reviews

  1. Great product 5 Star Review

    Posted by on 21st Oct 2015

    This is a very good stain. After trying many different stains over the last 20 years or so, I will not be looking for a better one. I prefer wipe on stains and this one does the trick. This product went on smoothly without leaving blotching effects, without a pre stain penetrator. The best part is that it has little to no smell. No more open shop doors or masks.

  2. Works fine on an absorbant surface... 3 Star Review

    Posted by on 31st Aug 2012

    though color lacks the vibrancy of an oil base stain. I stain and finish many fiberglass and metal doors. This product WILL NOT WORK for that..it will not dry. The solvent-based Jel'd Stain is the real deal for that purpose...it can be applied and dry brushed to even it out...let dry, overcoated thrice...done. I don't care for water-borne products where the true beauty of the wood is of concern. Use the water stuff on the insides of the cabinets/drawers for fast turnaround. All of the Woodkote products are not cheap...but VERY HIGH QUALITY...and that's what matters to me. Thanks.

Add to Wish List

Click the button below to add the Wood Kote Jel'd Stain H2O to your wish list.

You Recently Viewed...