Ultra Flagship UV 450 is formulated for exterior and interior wood surfaces especially those surfaces that are subject to heavy wear such as doors, windows, floors and above waterline marine surfaces. Ultra Flagship UV 450 may be applied to bare, bleached or stained wood. They are compatible with a variety of other Wood Kote products. Please refer to the Wood Kote Schedule of Product Compatibility and Recommended Dry Times.
One application of Ultra Flagship UV 450 will cover approximately 400-500 sq ft/gal (9,8-12,2 m2/L). For best results, 3–4 coats are recommended.
Composition & Properties-
Ultra Flagship UV 450 are almost pure polyurethane resin formulations with only a small percentage of modifying resin. Ultra Flagship UV 450 contain the maximum effective quantity of two UV (ultra violet) inhibitors. They are intended for application without thinning. If thinning is desired, PolySolvent (mineral spirits) should be used or, if regulations require a VOCexempt thinner, use AceThin (acetone), or OxyThin (p-Chloro-a,a,a Trifluorotoluene).
Posted by Unknown on 1st Oct 2015
this product is unbelievable. i used it 19 yrs ago on my fiberglass door that takes in southern sun in northern nevada. that is some real heat and sun rays. it has performed just wonderfully. i just started in the last few years putting on a coat where it starts to look dull. i did do some touch up with the stain this year and found out stripping fiberglass is not the thing to do. keep up with it every couple years with some light sanding, a few strokes of stain and your gloss and you have a new door. my interior wood windows look so stunning with the gloss and semi-gloss. you can't find a comparable product in the homes stores. alot of us wish it was available in our home stores.