Basic Use-

W-F-C is a wood flour cement formulated to be combined with fine sanding dust (wood flour) to create a fast drying wood filler. It is primarily used on wood flooring but can be used on a variety of interior wood surfaces. W-F-C is most effective when applied to the wood from which the wood flour was derived because a near perfect color match will result. W-F-C is recommended where a filler is required for photosensitive woods because the wood flour in WF-C will change color with surrounding wood. It may be applied to bare wood. It may be applied to bleached wood provided the wood flour is derived from the bleached surface. It may be used prior to the application of a variety of other Wood Kote products. Please refer to the Wood Kote Schedule of Product Compatibility and Recommended Dry Times. W-F-C is is a filler and not a coating, and thus it is not subject to the US Environmental Protection Agency (EPA) Volatile Organic Compound (VOC) emission requirements for Architectural and Industrial Maintenance (AIM) coatings (effective 13Sep99) or California SCAQMD Rule 1113 (effective 14May99).

Advantages-

• Allows a perfect color match with surrounding wood
• Will change color with surrounding wood
• Economical

Coverage-

One application of W-F-C will cover approximately 250-750 sq ft/gal (23,3-69,7 m2/L) depending on the surface to be filled and the ratio of W-F-C to wood flour.

Composition & Properties-

W-F-C is a clear high viscosity nitrocellulose-based compound. It is intended for application without thinning. If thinning is desired, LaqThin T-99A (lacquer thinner) should be used or, if regulations require a VOC-exempt thinner, use AceThin (acetone).